Videx VX2200 Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 5)

PAGE 5 of 68 VX2200 TECHNICAL MANUAL VER1.5

316x

BABA

DIGITAL PANELS

Digital panels are available in the 8000 Series, 4000 Series and vandal resistant. The difference is mainly

aesthetics; they all share the same connections, volume adjustments and programming menu. Digital panels

can also be programmed with a PC using the SP37 programming kit. The PC connects to the panel via a

jack socket located in the rear of the panel. Call progress is shown on a 2 line back lit LCD display. The

panels also benefit from voice annunciation and call progress tones which guide the caller through the

process of contacting an apartment.

CONNECTION FUNCTION

GND 0V connection from PSU and ground connection

+12 12-14Vdc from PSU

- 0V connection to bus

L Bus connection (Data, speech and power)

BS Busy connection for multiple door systems

SL Switched 0V output (Triggers during a call, for the duration of the call)

NC Normally closed connection of the dry contact relay output

C Common connection of the dry contact relay output

NO Normally open connection of the dry contact relay output

TRD Trade code enable (Switched 0V to enable)

PTE Push to exit button input (Switched 0V to trigger relay output)

JUMPERS

The two jumpers on the panel must be set

before powering up to initialise the panel in the

correct mode. When using 3161 or 3162

telephones the jumper’s must be in the ‘B’

(316x) position, for all other telephones,

videophones and video monitors the jumper’s

should be in the ‘A’ (Others) position.

1 2 3 4 5 6 7 8 9 10 ... 67 68

Nessun commento

Videx VX2200 Guida alla Risoluzione dei Problemi Pagina 5