Videx VX2200 Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 31)

PAGE 31 of 68 VX2200 TECHNICAL MANUAL VER1.5

PROGRAMMING NUMBER OF RINGS (FACTORY SET 6 RINGS)

 Press and hold “

” (for approx 10 seconds) until the unit emits a beep.

 Press “

” as many times as the number of rings required (i.e. 6 presses = 6 rings with a maximum

of 9 rings)

 Once the number of rings required has been reached, wait 3 seconds for the exit beep.

 The new value is now stored.

PROGRAMMING THE PRIVACY DURATION (FACTORY SET WITH OUT TIMEOUT)

 Press and hold “

” (for approx 10 seconds) until the unit emits a beep.

 Press “

” again to set the privacy duration. Each time the button is pressed, it will increase the

privacy duration by 15 minutes (starting from 0 up to a maximum of 20 hours i.e. pressing the button

8 times = 2 hours up to a maximum of 80 presses for 20 hours). Once the required privacy duration

has been reached, wait 3 seconds for the exit beep.To set the privacy with no time out Press and

hold “ ” (for approx 10 seconds) until the unit emits a beep do not press any other button, wait 3

seconds for the exit beep.

 The new value is now stored.

RESTORE FACTORY DEFAULTS

 Power up the intercom keeping pressed “

”;

 The intercom will emit a beep to confirm the operation;

 Release “

”.

TECHNICAL SPECIFICATION

Addressing range : from 1 to 180 (BIN code)

Working voltage : 12Vdc

Stand-by absorption : about 6mA

Phone max. absorption : about 50mA

Working temperature : -10 +50 C°

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 67 68

Nessun commento

Videx VX2200 Guida alla Risoluzione dei Problemi Pagina 31