
PAGE 23 of 40 GSM DOOR INTERCOM TECHNICAL MANUAL VER 2.0.5
1111TBA? Query setting, A text message will be sent to the sender
with the stored time window.
1111TBA”” Delete the time band and allow calls to be received at
any time.
1111TBA””? Delete and confirm deletion of the time band.
ENABLING/DISABLING SILENT DIALLING
When the intercom is calling the telephone number there is a choice of either hearing the
ringing noise from the intercom or just hearing beeps to indicate calling.
Ringing heard during calling: nn = 01
Beeps heard during calling: nn = 00
1111AUEnn Store the mode nn = 00 or 01.
1111AUEnn? Store the mode nn = 00 or 01. Also send a confirmation
text back to the sender.
1111AUE? Query the current stored mode. A text message will be
sent to the sender showing the stored mode.
ENABLING/DISABLING ADDITIONAL DIVERTS
The default for diverts is that each of the 50 call buttons can have one divert number. If the
additional diverts facility is activated it will be possible to have up to 5 divert numbers but
the system will then be limited to 10 call buttons.
Standard divert to only one number: nn = 01
Extended divert to up to 5 numbers: nn = 00
1111EXDnn Store the mode nn = 00 or 01.
1111EXDnn? Store the mode nn = 00 or 01. Also send a confirmation
text back to the sender.
1111EXD? Query the current stored mode. A text message will be
sent to the sender showing the stored mode.
When using extended divert mode, use the following memory locations to store the
numbers:-
Button Primary 1
s
Divert 2
n
Divert 3
r
Divert 4
Divert 5
Divert
1 STN001 STD001 STD011 STD021 STD031 STD041
2 STN002 STD002 STD012 STD022 STD032 STD042
3 STN003 STD003 STD013 STD023 STD033 STD043
4 STN004 STD004 STD014 STD024 STD034 STD044
5 STN005 STD005 STD015 STD025 STD035 STD045
6 STN006 STD006 STD016 STD026 STD036 STD046
7 STN007 STD007 STD017 STD027 STD037 STD047
8 STN008 STD008 STD018 STD028 STD038 STD048
9 STN009 STD009 STD019 STD029 STD039 STD049
10 STN010 STD010 STD020 STD030 STD040 STD050
Commenti su questo manuale